Saltar al contenido principalAller au contenu principalΜετάβαση στο κύριο περιεχόμενοSkip to main contentSaltar para o conteúdo principalVai al contenuto principale
TECNOCEMENTO
Curved ceiling lit in violet and a line of red light above dark continuous surfaces.

Microcement and wood

Microcement and wood come together in living rooms, kitchens and bathrooms: a continuous surface beside a material with grain, direction and memory. This collection brings together 15 photographs of real projects with TECNOCEMENTO® as a starting point for your own space.

Living room, kitchen, bathroom, touch and routes

What each material brings to each room, and what has to be resolved where the two meet. Each section has three photographs chosen to illustrate it.

Combining them in a renovation? Here is what to check at the junction between microcement and wood. And if you would rather browse, here are the 15 photographs.

A wooden wall can hold books, frame the fire or gather the objects of a lifetime; facing it, the continuous microcement floor lets the whole room breathe. Wood brings a human scale, a front that organises the space or a ceiling that gathers it from above.

On living-room walls and floors, TECNOCEMENTO PLUS® is applied over terrazzo, tiles or self-levelling compound without removing the existing floor. When choosing, consider continuity with the rest of the home and the junctions with wooden floors, which need a joint.

The island traces a line where the materials meet. Around it, wood brings a pattern you notice up close, while the grey planes hold the composition together. In kitchens open to the dining and living areas, cooking, reading and sharing belong to the same interior.

Kitchen floors and splashbacks are finished with TECNOCEMENTO PLUS®. The island and worktops need a substrate prepared for that use and the final protection the system specifies; the junctions with wooden units and the finished heights are best defined beforehand.

Wood can appear as a band beneath the washbasin, a door or a worktop, and its presence changes how the grey and the pale tones read. Bathrooms open to daylight sit alongside more intimate rooms where the lighting brings out every nuance.

On floors and walls near water, TECNOCEMENTO IMPER® is suitable for coating and waterproofing, at a thickness of 2-3 mm, including over existing tiles. The wood is kept out of direct contact with water and the junction is sealed.

At TECNOCEMENTO® we sum up our approach to application like this: 40% sound substrate, 40% applicator and 20% product.

40%sound substrate
40%applicator
20%product

Approved TECNOCEMENTO® applicators.

Before choosing the colour, check the stability of the substrate, any damp, and how the joints and the junctions with the wood will be resolved.

Microcement in bathrooms: disadvantages and how to prevent problems →

An old beam, the irregular edge of a log or a pane of glass that lets the continuous surface show through introduce another measure of space. The combination makes sense in these small encounters: a surface that extends, facing a piece that keeps the imprint of the tree.

In showers and wet areas, TECNOCEMENTO IMPER®. Solid wood pieces close to water need their own protection, with a joint and a flexible sealant where they meet the microcement. To choose the tone, see the microcement colour chart.

In Biar, the wooden staircase stands out against the grey wall and the cables draw a vertical rhythm. A wooden counter runs alongside the route to the stairs, and the change in flooring at the threshold between the corridor and the bathroom marks the passage from one space to another.

Continuous floors in homes: TECNOCEMENTO PLUS®. At entrances to commercial premises and in heavy-traffic areas: TECNOCEMENTO HIGH TRANSIT®. At thresholds, the change in flooring is detailed with a threshold profile or a perimeter joint, and the finished heights of doors and steps must be checked.

Wood moves with humidity and temperature; microcement is a continuous coating. The two must not be rigidly joined. Before work starts, decide how each point of contact will be detailed.

  • Leave a joint where the two materials meet, including at skirting boards and unit fronts.
  • Seal the junction with a flexible sealant, especially in wet areas.
  • Where the flooring changes, detail the threshold with a threshold profile or a perimeter joint and check the finished heights.
  • Choose the system according to each area's exposure to water, and protect any wood nearby.

How should the junction be detailed in my project?

Ask our team for the right detail for the substrate, the wood and the use of each area.

Can microcement and wood be combined in a bathroom?

Yes. Microcement covers the floor, walls and shower as one continuous, waterproof surface, and wood appears in the vanity unit, the door or a worktop, out of direct contact with water. In wet areas the system is TECNOCEMENTO IMPER®, a 2-3 mm coating that can also be applied over existing tiles.

How is the junction between microcement and wood detailed?

Wood moves with humidity and microcement is a continuous coating, so the two must not be rigidly joined. The junction is detailed with a joint and a flexible sealant and, where the flooring changes, with a threshold profile or a perimeter joint. A trained applicator defines the detail according to the substrate.

Which microcement colours go best with wood?

Mid and dark greys with warm-toned woods such as oak or walnut, and pale or cream tones with light woods. The TECNOCEMENTO® microcement colour chart lets you compare the ranges; before making a final choice, look at a physical sample under the room's own lighting.

Can microcement be applied over wood?

On walls, yes: TECNOCEMENTO HOME® is suitable for very flat vertical substrates such as plaster, plasterboard or MDF. On wooden or parquet floors the answer depends on the substrate, its stability and its moisture content, and an applicator should assess it before any work begins.

What is the difference between a two-component microcement and a ready-to-use one?

A two-component microcement is prepared on site by mixing the cement-based component and the resin in the proportion set by the manufacturer, and it is applied by professionals trained in the system. TECNOCEMENTO® is a two-component microcement. A ready-to-use product comes premixed and is designed for simpler application.

Who can apply TECNOCEMENTO® in my project?

Applicators and distributors trained by the brand in Spain and Europe. You can find the nearest one in the distributor directory; if you are an applicator, the brand runs application courses.

Where can I see more projects?

In the project galleries for microcement in bathrooms, kitchens and homes, and in the combinations in Inspiration.

Planning a project with microcement and wood?

Tell us which surfaces you want to cover, their approximate area in square metres and where the project is. Contact TECNOCEMENTO® to assess your project. TECNOCEMENTO® is a two-component microcement applied by professionals trained in the system.

Are you an applicator? Train with TECNOCEMENTO® and join the applicator network ↗

← Back to Inspiration