Two-component or ready-to-useBoth are called microcement.
They aren’t made the same way, and they aren’t for the same jobs.
We make both. TECNOCEMENTO® is two-component: a powder and a resin mixed on site. CEMENTEC® is ready-to-use: a paste that arrives already pigmented in the tub.
That’s why I can tell you about both sides without having to defend either. Some things don’t change with the product and matter more than it does: the substrate, the sealer and whoever applies it. And others change everything: the colour, the working time, the dust, the strength and, above all, the depth of the finish.
First, what’s the same. Then, what changes. Finally, which to choose for your project.
Tomás Amat
Architect · TECNOCEMENTO®
What’s exactly the sameThe product changes. The substrate still rules.
What do two-component and ready-to-use microcement have in common?
Four rules that don’t depend on what you buy.
Substrate preparation. Over tiles, with both systems the grout joints are always filled and a primer is applied before starting. And if the floor underneath moves, both will crack. No product fixes a substrate that moves.
The sealer. Neither is waterproof on its own. Resistance to water, kitchen stains and cleaning products comes from the final protective coat. For TECNOCEMENTO® it’s FORTE PLUS; for CEMENTEC®, FINISH FORTE PLUS.
The thickness. Both end up between 2 and 3 mm. There’s no need to plane doors or lift the existing floor.
Not on wood. Neither goes over parquet or a floating floor: wood moves with humidity and temperature, and the coating ends up copying that movement in the form of a crack.
Questions about damp, cracks and cleaning have the same answer for both.
Microcement in bathrooms: disadvantages and how to prevent them
Two-component microcementA powder and a resin mixed on site.
What is two-component microcement?
The cement reacts on the wall. And you can see it.
A two-component microcement comes in two parts: a powdered mortar and a liquid acrylic resin. They’re mixed on site, pigmented and applied in thin coats with a steel trowel. It’s microcement as it has always been, and for me it’s still the jewel in the crown.
The reason is depth. Because it contains cement, each coat works more aggressively on the one beneath. The steel trowel burnishes the material against the aggregate and leaves clouding, shading and burnish marks that overlap. That depth is what makes a microcement beautiful, and it’s very hard to imitate.
It’s also the most resistant to abrasion. That’s why it’s our choice for commercial premises, areas with heavy foot traffic and demanding outdoor areas, with the right system for each use: TECNOCEMENTO HIGH TRANSIT® for high-traffic floors, TECNOCEMENTO PLUS® for floors and walls, TECNOCEMENTO INDUSTRY® for indoors and outdoors.
It’s also the most demanding. It’s more complex to manufacture, and it requires more investment and training from the applicator than a ready-to-use product does.
What it asks in return is craft. It’s mixed vigorously and it generates dust. And the pigment is measured out on site: did I put in two grams, or two plus two? If one batch has a different dose from the last, the shade changes. It’s the most common mistake in the world of two-component microcement, and it’s why we train our applicators.
Depth is the key to beauty. And depth comes from the cement.

Façades and floors in the sun: the 00 · 05 · 00 rule
- Year zero. This is how TECNOCEMENTO® starts out: the colour of day one.
- Year five. The sun has faded the surface. Inspection, repair and maintenance with a tinted polyurethane sealer.
- Back to zero. The façade or floor is back to how it was at the start.
Ready-to-use microcementA pigmented paste you open and apply.
What is ready-to-use microcement?
Polymers and micronised silica. No cement.
No ready-to-use microcement contains cement, and ours doesn’t either. It’s a blend of polymers and micronised silica aggregate that arrives as a paste, with the colour mixed in at the factory. You open the tub and apply it. Strictly speaking, it’s called microcement for the finish it aims for, not for what’s in it.
Here’s something hardly anyone mentions: the resin in two-component microcement is acrylic too. When a brand presents its ready-to-use product as “acrylic”, it isn’t describing a difference. The real difference is the cement: one contains it and reacts on the wall; the other doesn’t.
Its advantages are real:
- It comes ready. Weighed, measured and mixed into a paste: there’s nothing to measure out or mix.
- The colour is always the same. It’s pigmented throughout, and the whole lot is the same shade from start to finish. There are no differently coloured batches.
- It’s clean. It generates no airborne dust.
- It’s intuitive. You don’t need previous experience or in-person training to apply it.
- Hardly any material is left over. What’s left on the trowel goes back into the tub; with the lid tightly closed it keeps for another day or for a touch-up.
- It’s cheaper to transport. Less volume and less weight to move.
What it loses is depth. With no cement to react, the finish is flatter: we get more artificial, less natural textures than with a two-component microcement. On residential floors it performs very well; for heavy traffic, CEMENTEC® has a specific version with epoxy resin, which is extremely hard.
What it gives up in depth, it gains in consistency.
Head to headTwo-component versus ready-to-use.
| Two-component TECNOCEMENTO® | Ready-to-use CEMENTEC® | |
|---|---|---|
| What it is | Powdered cement mortar + acrylic resin | Polymers and micronised silica aggregate, no cement |
| How it arrives | In two parts; mixed and pigmented on site | As a paste, pigmented at the factory |
| How it hardens | The cement reacts with the resin | It dries in the air |
| Working time | About 45 minutes per batch, once mixed | No mixing; with the lid tightly closed it keeps for another day |
| Finish | Deep: clouding, shading and trowel burnish marks | Flatter and more uniform |
| Colour | Depends on the pigment dosage in each batch | The same throughout the lot |
| High-traffic floors | Maximum abrasion resistance | With the epoxy resin version |
| Requirements | More complex to manufacture; more investment and training to apply | Less investment and training |
| Who applies it | A trained applicator | A professional or a homeowner, with no previous experience |
| Dust and mixing | Yes, intensive mixing | No mixing or airborne dust |
| Leftover material | Any mix that sets is wasted | Goes back into the tub |
| Sealer | FORTE PLUS | FINISH FORTE PLUS |
| Substrate, thickness and wood | The same for both: filled grout joints and primer over tiles, 2-3 mm, never over parquet or floating floors | |
Which microcement to chooseWhich one goes on your project.
Which is better, two-component or ready-to-use microcement?
Neither is better. Each is better for its own job.
Shop, restaurant, heavy traffic or a demanding outdoor area: two-component. That’s where its abrasion resistance makes the difference.
You want depth, a finish that looks like worked stone: two-component. Only cement gives it that character.
Walls and floors in a home, with a professional applicator: both work. Decide on the look you want.
A renovation you’re doing yourself, or a touch-up in stages: ready-to-use. The colour doesn’t vary from tub to tub, and what’s left over can be kept.
Shower or bathroom: both, under the same condition. A shower depends on what goes underneath (waterproofing and fall) and on the sealer, not on the type of microcement.
No product makes up for a bad substrate or an unskilled hand.
What about one-component microcement?
There’s a third family: a powder mixed with water.
One-component microcement isn’t the same as ready-to-use, although the two are often confused. It comes as a powder, like two-component, but it’s mixed with water instead of resin. We don’t make it, and I’d rather not give an opinion on what I don’t make.
Frequently asked questionsWhat we’re asked most.
What is the difference between two-component and ready-to-use microcement?
The cement. Two-component microcement, also known as bicomponent and the traditional system, is a powdered cement mortar mixed on site with a liquid acrylic resin and the pigment: it reacts on the wall and gives greater depth and abrasion resistance. Ready-to-use microcement is a paste of polymers and micronised silica aggregate, pigmented at the factory and with no cement: the colour is the same throughout the lot and it is easier to apply.
Is two-component microcement the same as 2K epoxy microcement?
No. Two-component microcement is a cement mortar mixed with an acrylic resin. 2K epoxy microcement uses an epoxy resin and a hardener instead. Among ready-to-use products, CEMENTEC® has an epoxy resin version for heavy traffic.
Does ready-to-use microcement contain cement?
No. No ready-to-use microcement contains cement: these products are made from polymers and micronised silica aggregate and dry in the air. The one that contains cement is two-component.
Is ready-to-use microcement as tough on floors?
On residential floors it performs very well. For heavy traffic, two-component resists abrasion better; among ready-to-use products, CEMENTEC® has an epoxy resin version for those cases.
Is microcement suitable for commercial spaces?
Yes. Two-component is our choice for commercial premises and heavy foot traffic, with TECNOCEMENTO HIGH TRANSIT® for high-traffic floors. Among ready-to-use products, CEMENTEC® has an epoxy resin version. In both cases, resistance to water and stains comes from the sealer.
Can a homeowner apply it?
Ready-to-use, yes: you don’t need previous experience or in-person training, because it isn’t mixed or pigmented on site. Two-component takes craft: measuring out, mixing and working the coats with a steel trowel.
Why does the colour change in two-component microcement?
Because the pigment is measured out on site. If one batch has a different dose from the last, the shade varies. In ready-to-use microcement the colour is mixed in at the factory and is the same throughout the lot.
Can they be applied over tiles or parquet?
Over tiles, both, filling the grout joints first and applying a primer. Over parquet or a floating floor, neither: wood moves and the coating cracks.
Are they waterproof?
Neither on its own. Resistance to water and stains comes from the sealer: FORTE PLUS for TECNOCEMENTO® and FINISH FORTE PLUS for CEMENTEC®. In a shower, the waterproofing also goes underneath.
Why we make bothThere’s a product for every project.
We make TECNOCEMENTO® for the applicator looking for depth and strength, and CEMENTEC® for anyone who needs a consistent colour and straightforward application. Tell us what’s underneath and how you’ll use it, and we’ll tell you which one to use and who can apply it in your area.
Prefer to write? Applicator contact form
Tomás Amat
Architect · TECNOCEMENTO®